Thermal and structural behavior of milk fat. 3. Influence of cooling rate and droplet size on cream crystallization

Crystallization of triacylglycerols (TG) within milk fat globules of creams is studied with an instrument coupling time-resolved synchrotron X-ray diffraction (XRDT) at both small and wide angles and high-sensitivity differential scanning calorimetry (DSC) at cooling rates of -3 and -1 degrees C/min from 60 to -10 degrees C and compared to that of the anhydrous milk fat (AMF). Simultaneous thermal analysis permits correlation of the formation of the different crystalline species monitored by XRDT to the DSC events. Under the above cooling conditions, milk fat TG sequentially crystallize, within the globules, from about 19 degrees C, in three different lamellar structures with double-chain length (2L) stackings of 47 and 42 A and a triple-chain length (3L) stacking of 71 A, all of alpha type, which are correlated to two or three overlapped exothermic peaks recorded by DSC. Compared to what is observed for AMF, TG crystallization in emulsion (i) favors sub-alpha formation at low temperature and (ii) induces layer stacking defects in 3L crystals. Subsequent heating at 2 degrees C/min shows numerous structural rearrangements before final melting, confirming that (i) cooling at -1 degrees C/min leads to the formation of unstable crystalline varieties in the dispersed state and (ii) a monotropic transition alpha-->beta' takes place. Similar behavior is observed for cooling at -3 degrees C/min and subsequent heating. An overall comparison of the thermal and structural properties of the crystalline species formed as a function of the cooling rate, between >1000 and 0.15 degrees C/min, and stabilization time at 4 degrees C is given. Depending on the cooling rate, at least five crystalline subcell species are observed at wide angles, alpha and sub-alpha, two beta' and one beta. At small angles, at least six lamellar stackings are identified, three 3L and three 2L. However, a single subcell packing (e.g., alpha) might correspond to several longitudinal chain stackings, demonstrating the usefulness of the small-angle XRD technique. Reconstituted emulsions homogenized under different pressures are used to determine the influence of droplet size on crystallization. The decrease of droplet size induces (i) a higher supercooling/supersaturation and (ii) a higher disorder and/or a smaller size of TG crystals within the emulsion droplets. At the supramolecular scale, polarized light microscopy shows that various cooling rates applied in situ using a temperature-controlled stage directly influence crystal sizes and their type of organization within milk fat globules. The faster the cooling rate, the smaller the size of the crystals within the globules.     

Hybridization-induced interfacial changes detected by non-Faradaic impedimetric measurements compared to Faradaic approach

A biosensor for direct label-free DNA detection based on a polythiophene matrix is investigated by electrochemical impedance spectroscopy (EIS). Impedimetric experiments are performed with and without redox probe in solution. The non-Faradaic impedance measurements reveal two relaxation processes located at 50 Hz and 5 kHz, respectively. The first relaxation process, located at low frequencies, allows to detect biorecognition events by measuring the phase angle decrease, in accordance with a hindrance of the polaronic conduction. The second relaxation process, located at 5 kHz and originating from DNA modification, seems to increase with the length of the target sequence. These results suggest that this loaded support provides a platform for impedimetric detection of hybridization at high frequencies, leading to less time-consuming detection procedure. For a better understanding, results obtained in non-Faradaic mode are compared with Faradaic approach.     

The role of the main silica precursor and the additive in the preparation of low-density xerogels

The incorporation of an additive during sol-gel synthesis reduces shinkage during ambient drying. The following additives have been studied: 3-(2-aminoethylamino)propyltrimethoxysilane (EDAS), 3-aminopropyltriethoxysilane (AES) and 3-(2-aminoethylamino)propyltriethoxysilane (EDAES) and the main silica precursors were tetraethylorthosilicate (TEOS) and tetrapropylorthosilicate (TPOS). When the additive contains methoxy groups (EDAS), it acts as a nucleation agent of the silica particles and exactly the same properties (pore volume, specific surface area, particle and aggregate size) are obtained whether the main reagent is TEOS or TPOS. The nucleation mechanism is based on the difference in reactivity between additive and main reagent. In case of nucleation by the additive, the nucleation agent fixes the properties whatever the main silica precursor is. When both the additive and the main reagent contain ethoxy groups (series AES-TEOS and EDAES-TEOS), there is no nucleation mechanism by the additive, and the silica particle size remains nearly constant. With less reactive main reagent (series AES-TPOS and EDAES-TPOS), pore volumes up to 17 cm³/g have been obtained with pore sizes up to nearly 10 μm and very big particles (∼100 nm). The absence of nucleation by the additive for the couples AES-TPOS and EDAES-TPOS could be due to the fact that the difference in reactivity between ethoxy groups and propoxy groups is not sufficient to initiate the nucleation mechanism by the additive. In the absence of nucleation by the additive, the main reagent plays a role: highly porous materials with very large pores are prepared with TPOS.     

Preparation of low-density xerogels from mixtures of TEOS with substituted alkoxysilanes. I. O NMR study of the hydrolysis–condensation process

Low-density xerogels were synthesised by incorporation of an additive to base catalysed tetraethylorthosilicate (TEOS) alcogels directly during the preparation of the sol. The nucleation mechanism by the additive was established by experiments during sol–gel transition. ¹⁷O NMR spectroscopy on TEOS–ethanol–water, 3-(2-aminoethylamino)propyltrimethoxysilane (EDAS)–ethanol–water and EDAS–TEOS–ethanol–water solutions shows that the hydrolysis–condensation of EDAS is much faster than that of TEOS. Consequently it can be assumed that EDAS forms nuclei, onto which TEOS condenses later to form the silica particles.     

Textural properties of low-density xerogels

The extent of shrinkage during drying is controlled by the balance between the capillary pressure developed in the pore liquid and the modulus of the solid network. One first method to obtain low-density xerogels consists in strengthening TEOS-based alcogels by providing new monomers to the alcogel after gelation. In the second method, low-density xerogels are produced by surface modification (silylation) of the wet gel with trimethylchlorosilane. The capillary pressure is reduced and the presence of non-reactive species on the surface makes the shrinkage reversible. A reduction of the capillary pressure can be achieved by introduction of a substituted alkoxide 3-(2-aminoethylamino)propyltrimethoxysilane (EDAS) to a TEOS-based alcogel, synthesised in a single base-catalysed step. This additive acts as a nucleation agent leading to big silica particles (20 nm) with a low EDAS/TEOS ratio (0.03). The pores between those particles are also large and the drying stress is reduced. The textural properties of those three materials are compared: bulk densities of the samples modelled on the first and third method are varying in the same range (0.25–0.35 g/cm³) while xerogels obtained by the surface modification process are less dense (0.1–0.15 g/cm³). The biggest pores are observed in the third method.     

Magnetic resonance imaging screening in women at genetic risk of breast cancer: imaging and analysis protocol for the UK multicentre study. UK MRI Breast Screening Study Advisory Group

The imaging and analysis protocol of the UK multicentre study of magnetic resonance imaging (MRI) as a method of screening for breast cancer in women at genetic risk is described. The study will compare the sensitivity and specificity of contrast-enhanced MRI with two-view x-ray mammography. Approximately 500 women below the age of 50 at high genetic risk of breast cancer will be recruited per year for three years, with annual MRI and x-ray mammography continuing for up to 5 years. A symptomatic cohort will be measured in the first year to ensure consistent reporting between centres. The MRI examination comprises a high-sensitivity three-dimensional contrast-enhanced assessment, followed by a high-specificity contrast-enhanced study in equivocal cases. Multiparametric analysis will encompass morphological assessment, the kinetics of contrast agent uptake and determination of quantitative pharmacokinetic parameters. Retrospective analysis will identify the most specific indicators of malignancy. Sensitivity and specificity, together with diagnostic performance, diagnostic impact and therapeutic impact will be assessed with reference to pathology, follow-up and changes in diagnostic certainty and therapeutic decisions. Mammography, lesion localisation, pathology and cytology will be performed in accordance with the UK NHS Breast Screening Programme quality assurance standards. Similar standards of quality assurance will be applied for MR measurements and evaluation.     

Optical pump-terahertz probe spectroscopy of dyes in solutions: probing the dynamics of liquid solvent or solid precipitate?

The optical pump-terahertz probe spectroscopy was used together with ab initio calculations and molecular dynamics simulations to investigate ultrafast dynamics following electronic excitation of Coumarin 153 and TBNC (2,11,20,29-tetra-tert-butyl-2,3-naphtalocyanine) dyes in polar solvents. By scanning the terahertz waveform for different pump-probe delays this experimental technique allows us to obtain two dimensional spectra directly reflecting the temporal response of the system. A distinct signal was obtained for TBNC in chloroform, 2-propanol, and n-butanol, while no signal was recorded for Coumarin 153 in either of these solvents. We explain the nonequilibrium signal detected in TBNC solutions by the presence of a solid, polycrystalline phase of the dye resulting from irradiating the solution by intense optical pulses.     

Poly(ethylene glycol) Surface Coated Magnetic Particles

Summary: A methacrylate‐functionalized poly(ethylene glycol) macromonomer was copolymerized at the surface of methacrylate‐derivatized maghemite nanoparticles. After silylation of the magnetic core with methacryloxypropyltrimethoxysilane, two grafting procedures based on either a direct copolymerization reaction in water or an inverse emulsion polymerization were compared. A direct copolymerization led to low polymer surface amounts, whereas an inverse emulsion process allowed nanocomposite particles containing up to 90 wt.‐% polymer to be obtained.

TEM picture of maghemite‐PEG hybrid particles.